What happens if there is a microprocessor error on my Nilfisk-ALTO NEPTUNE 1 Pressure Washer and the light is flashing?
If the light is flashing due to a microprocessor error in your Nilfisk-ALTO Pressure Washer, the machine will shut down.
General| Number of Pistons | 3 |
|---|---|
| Ceramic Pistons | Yes |
| Pump Pressure (bar/MPa) | 120 bar |
| Power Consumption (kW) | 1.5 kW |
| Weight (kg) | 27 kg |
| Voltage/Phase/Frequency (V/~/Hz) | 230V/1~/50Hz |
| Cord Length (m) | 5 m |
| Max Pressure | 120 bar |
| Water Flow | 500 l/h |
| Motor Power | 1.5 kW |
| Dimensions | 400x300x400 mm |
| Weight | 27 kg |
Safety precautions for operating the appliance and preventing risks to persons.
General safety and usage regulations, including electrical connection requirements.
Safety requirements for electrical connections, including extension leads and circuit breakers.
Requirements for connecting the cleaner to the water supply, including backflow preventer.
Safety precautions during operation, fuel type recommendations, and warnings about hot water/steam.
Safety warnings related to electrical equipment, maintenance, and repair procedures.
Guidelines for maintenance, repairs, using genuine parts, and technical modifications.
Instructions for electrical connection, voltage checks, and cable reel safety precautions.
Step-by-step guide to switching on the cleaner, including self-test and motor start-up.
Steps for activating hot water operation and precautions for hose reels in hot water mode.
Procedure for steam operation, including nozzle change and safety control block settings.
How to adjust pressure and flow using the Vario trigger and gun, with safety warnings.
Instructions for using cleaning agents with different models and nozzle settings.
Explains fault indications on the display, their causes, and recommended remedies.
Lists common machine faults, their causes, and remedies for issues like no power or low pressure.
To Next Page
