Nilfisk-ALTO NEPTUNE 5 User Manual

8
english
1)
Options / model variants
Original instruction
NEPTUNE 5 / 7 / 8
3.10 Electrical connection
3.11 Antifreeze - before first
use
The machine is fl ushed with anti-
freeze at the factory to protect it
against freezin; this mixture (ap-
prox. 5 l) may be captured in a
suitable container for reuse.
CAUTION!
230 V / 400 V ?
(220 V / 440 V ?)
Some models have tha ability to
be used on either 230 Volt or a
440 Volt power supply. On these
models confi rm that the voltage
selector switch is in the proper
position to match the power
supply. Otherwise damage to
machines electrical components
may occur.
CAUTION!
When using a cord reel:
1. Release brake of the cord
reel.
2. Unwind the cord completely.
CAUTION!
The cleaner should only be con-
nected to a correctly installed
electrical supply.
1. Observe safety instructions in
chapter 1.
2. Insert the plug into the electri-
cal socket.
NOTE!
See chapter 9.3 Technical Data
for required quantity of water and
water pressure.
In the case of poor water quality
(sand, etc.), it is recommended
that an inlet water fi lter be in-
stalled.
Water supply hose should be
a reinforced hose and have a
minimum inside diameter of 3/4"
(19 mm).
400V
400V
230V
230V
400V
400V
2
3
0
V
2
3
0
V
3.9 Connecting the water
supply
1. Attach quick connect adapter
found with Owners Manual to
the water supply hose.
2. Rinse the water supply hose
briefl y in order to prevent sand
an other dirt particles entering
into the machine.
3. Attach water supply hose with
adapter to inlet quick connec-
tor.
4. Open water supply faucet.

Nilfisk-ALTO NEPTUNE 5 Specifications

General

Brand	Nilfisk-ALTO
Model	NEPTUNE 5
Category	Pressure Washer
Language	English