10
english
1)
Options / model variants
Original instruction
NEPTUNE 5 / 7 / 8
1. Open cabinet (and service door
if desired - see chapter 3.6, Step
1+2).
2. Turn the twist grip on the safety
control block all the way to the left
(counter- clock wise-direction).
3. Turn the main switch to position
.
4. Select temperature (over 100°C
(212°F)).
For special applications: replace the
standard nozzle with the steam spray
nozzle (accessory).
4.3 Pressure regulation
(Tornado Lance)
1. Turn the twist grip on the spray
unit:
– High pressure =
clockwise (+) for high pres-
sure
– Low pressure =
counter-clockwise (–) for low
pressure.
4.2.2 Steam operation (over
100°C (212°F))
BAR
4.5 Using cleaning agents
1. Select desired detergent (A)
or (B) and amount by turning
the knob to desired percent-
age.
2. Spray the object to be cleaned.
3. Allow the cleaning agent to
work, depending on the de-
gree of soiling. Then rinse off
with high pressure.
4.4 Pressure regulation
(VarioPress Gun)
1)
1. Turn the twist grip on the spray
unit:
Water volume
(–) (+)
min. max.
For special applications such as
disinfection, the exact detergent
concentration has to be deter-
mined by using a graduated
measuring container. For water
outlet volume of the machine see
chapter 9.3 technical data.
CAUTION!
Never allow cleaning agent
to dry on the surface to be
cleaned. The surface may be
damaged.
The percentage shown in the
illustration are only approximate
data.
5%
ca. ca.
3%
5%
3%
1%1%
To Next Page
Loading...
Need help?
General
