ASSEMBLY AND SETTINGS
X7 should reach you fully assembled,
with the exclusion of the PEDALS, the
SADDLE, THE FRONT FENDER and
THE HANDLEBAR and the FRONT
WHEEL, which are supplied
separately.
The front wheel arrives disassembled.
To assemble it, place the wheel
beetwen the fork legs, unscrew the
adjustment nut wand remove the right
spring. Insert the quick release skewer
in the left hole of the hub, place again
the right spring and screw the
adjustment nut. Then, block the cam
lever as tight as possible.
To Next Page
Loading...
