Connecting the charger
The battery (1) can be charged either on
the bike or can be removed and
charged separately.When the battery is
charged on the bike, the system
can be
switched on or off during charging.
Connect the charger to charging port
on battery (2) using the bottom hole in
the frame.Connect the charger’s
mains plug to a socket. The LED on
the charger unit will light with
different colors depen-ding on the
current charge level. The LED will
be red during charging and green
when fully charged.To know the
level of battery power check the
charge indicator on the display.First
disconnect the cable connector of the
battery and unplug the mains plug
from the socket.
1. Battery
2. Charging port
1
2
To Next Page
Loading...
