Battery
Problem Possible causes/consequences and Solutions
The charge indicator on
the control console is not
showing that the battery is
“full” even though a full bat-
tery charge has been perfor-
med.
The battery has been affected by the ambient tempe-
rature. The battery heats up during the charging pro-
cedure.
Let the battery cool down and repeat the charging pro-
cess.
Follow the instructions for charging the battery.
The charge indicator on the
control console is not re-
liably displaying the charge
level.
Due to frequent and brief charging and discharging of
the battery, the synchronisation between the charge in-
dicator and the actual battery charge level cannot be
calibrated.
Perform a full discharge after approx. 30 charge cycles.
This will calibrate the charge indicator to the charge
level of the battery. The service life of the battery will
not be affected by this.
To Next Page
Loading...
