• Handlebars and stem
• Saddle and seat post
• Frame and fork
• Tires and wheels
• Pedals and pedal cranks
• Brake pads and brake discs
• Chain and transmission
• Battery
If work on electronic equipment and its
software is carried out incorrectly, this
equipment could stop functioning. The
electronic systems are linked together by
interfaces. Modifications to electronic sy-
stems may also cause systems that have
not been modified to malfunction. These
malfunctions could affect the operating
safety of your e-bike and therefore also
have a considerable effect on your safety.
You should therefore have all work and
modifications to electronic components
carried out at a qualified specialist wor-
kshop.
Do not make any modifications or carry
out work, such as drilling, soldering or
welding, on the frame or other load-be-
aring components. The stability and the
service life of the components could be
affected as a result. If you remove war-
ning stickers, you or others may not be
aware of possible dangers.
Leave warning stickers in position.
Rotating components, such as whe-
els, chain, pedal cranks or pedals,
could trap and pull in parts of the body or
clothing. Make sure that neither clothing
nor objects being carried get caught in ro-
tating parts.
Wear close-fitting clothing. Never wear a
scarf.
After braking, in particular after a long
downhill stretch, the brake discs, brake
To Next Page
Loading...
