33
TROUBLESHOOTING
LIST OF ERROR CODES FOR SENSOR DRYER
Error code Cause
Er 1
Error 1
Regulator sensor. Error in the sensor at the element.
The error is either a discontinuity or short-circuit in the
sensor.
Reset by disconnecting the power supply.
Er 2
Error 2
Outlet sensor. Error in the sensor in the outlet duct.
This error is the same as Error 1.
Reset by disconnecting the power supply.
Er 3
Error 3
The Max time for the drying programme interrupts the
drying process.
Cause: The electronics has not received a signal from
the outlet sensor that the laundry is dry.
To reset the alarm, hold down the Start/Stop button
for 5 sec.
To Next Page
