Ninja 1000 - Quick Blender Assembly Guide

PULSE
IMPULSION
POWER
MARCHE/ARRÊTE
LOW
BAS
MEDIUM
MOYEN
HIGH
ÉLÉVÉ
PULSE
IMPULSION
LOW
BAS
MEDIUM
MOYEN
HIGH
ÉLÉVÉ
PULSE
IMPULSION
LOW
BAS
MEDIU
M
MOYEN
HIGH
ÉLÉVÉ
PULSE
IMPULSION
LOW
BAS
MEDIUM
MOYEN
HIGH
ÉLÉVÉ
POWER
MARCHE/ARRÊTE
POWER
MARCHE/ARRÊTE
POWER
MARCHE/ARRÊTE
quick assembly:
1.
Place pitcher on base and turn
clockwise to lock in place.
2.
Holding the stacked blade
assembly by the top of the
shaft, insert it into the pitcher.
3.
Align arrows on lid and
handle, then lower handle
to lock in place.
WARNING: Stacked Blade Assembly is sharp and not locked in place. Make sure lid is locked onto the
pitcher before pouring. If pouring without lid, carefully remove Stacked Blade Assembly first. Failure to
do so will result in a risk of laceration. Refer to the Ninja Owner’s Guide for additional information.