Ninja BL490 User Manual

14
www.ninjakitchen.com
English
WARNING: Handle the Pro Extractor Blades Assembly with care, as the blades are sharp.
WARNING: Never leave the appliance unattended while in use.
WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to
shatter, which may cause personal injury.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the cup upon completion of blending. Do not
store ingredients before or after blending in the Nutri Ninja Cup with the blade assembly attached. Some
foods may contain active ingredients or release gases which will expand if left in a sealed container,
resulting in excessive pressure buildup that can pose a risk of injury. For storage, only use Sip & Seal Lid
to cover.
IMPORTANT: Make sure that the motor base is plugged in for use.
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3 Add ingredients to the Nutri Ninja Cup.
4 Place the Pro Extractor Blades
®
onto the cup and tightly
screw it on clockwise until you have a good seal.
(Fig. 1)
5 Turn the Nutri Ninja Cup upside down and place it onto
the motor base, aligning the tabs on the cup with the
motor base. Rotate the Nutri Ninja Cup clockwise until
it locks in place, you will hear a click when the lock is
engaged. (Fig. 2)
6 Press the power button on, and select the speed or
Auto-iQ program that suits your needs. (Fig. 3) The
Auto-iQ program will stop the appliance automatically
at the end of the program.
7 To pause the appliance, press the selected speed or
Auto-iQ program a second time. When the program is
paused, the light on the program button will flash until
you press it again to resume the rest of the program.
Fig. 1 Fig. 2
Assembly and Use of the Nutri Ninja
®
Cups
Fig. 3 Fig. 4 Fig. 6
ASSEMBLY USE REMOVAL
8 Once you have reached your desired consistency, stop
the appliance by pressing the power button and wait
for the blade to stop turning. Turn the Nutri Ninja Cup
counter-clockwise and pull straight up to remove.
(Fig. 4, Fig. 5)
NOTE: Do not overfill! To avoid spilling, do not add
ingredients past the “Max Liquid” line.
9 Turn the cup upright and remove the Pro Extractor
Blades by twisting the Pro Extractor Blades counter-
clockwise. (Fig. 6)
10 Do not store blended contents with the Pro Extractor
Blades Assembly attached.
11 Place the Sip & Seal
®
lid onto the Nutri Ninja Cup, twist
to seal and enjoy!
12 For storage, only use Sip & Seal lid to cover.
13 Be sure to store the Pro Extractor Blades Assembly
attached to an empty cup when not in use.
14 Make sure that the motor base is unplugged when not
in use.
15 To release the motor base from
the counter or table top, place your
hands underneath both sides of the
motor base and gently pull the unit
up and towards you.
Fig. 5

Ninja BL490 Specifications

General

Brand	Ninja
Model	BL490
Category	Blender
Language	English