Ninja BL700 series - Using the Pitcher; Using the 6-Blade Assembly; Using the Whipping Attachment

www.ninjakitchen.com
11
USING THE 6-BLADE ASSEMBLY
1 Holding the 6-Blade assembly by the
shaft, place it onto the gear shaft inside
the pitcher. Ensure that the attachment
fits around the gear shaft and that it is
standing straight.
2 Add the ingredients and secure the
pitcher lid onto the pitcher. (Fig. 8)
3 Plug the power cord into the electrical
outlet and press on the power button (
).
NOTE: Please refer to “Speed Settings
& Uses” chart for suggested uses and
speeds.
Fig. 8
Using the Pitcher
USING THE WHIPPING ATTACHMENT
1 Holding the whipping attachment by the
shaft, place it onto the gear shaft inside
the pitcher. Ensure that the attachment
fits around the gear shaft and that it is
standing straight.
2 Add the ingredients and secure the
pitcher lid onto the pitcher. (Fig. 9)
3 Plug the power cord into the electrical
outlet and press on the power button (
).
NOTE: Please refer to “Speed Settings
& Uses” chart for suggested uses and
speeds.
IMPORTANT: When using the whipping
attachment for whipping egg whites,
open the pouring spout cap after 30
seconds to allow the egg mixture to
aerate.
Fig. 9
BL700_30_BL701_30_SERIES_IB_ENG_110106.indd 11 11-01-07 10:26 AM