EasyManuals Logo

Ninja BL700 series User Manual

Ninja BL700 series
23 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #14 background imageLoading...
Page #14 background image
14
TOLL FREE: 1-800-798-7398
HOW TO STORE
1 Store the Ninja
Kitchen System 1100
upright with the pitcher on the motor
base, 6-Blade assembly inside the pitcher
and lid on the pitcher. Do not place
anything on top. Store the bowl with the
4-Blade assembly inside and the lid on
top. Keep the bowl and the rest of the
attachments along side the appliance
where it will not be damaged and won’t
cause hazard.
RESETTING THE MOTOR THERMOSTAT
The Ninja
KS1100 features a unique safety
system which prevents damage to the
unit’s motor and drive system should you
inadvertently overload your appliance. If the
appliance is being overloaded, the motor
will stop and the power light will remain
lit and the 1, 2 and 3 will flash. To reset the
appliance, follow the resetting procedure
below:
1 Unplug the appliance from the electrical
outlet.
2 Remove and empty the container and
ensure that no food is jamming the
cutting blades or attachments.
3 Allow the appliance to cool for
approximately 15 minutes.
4 Re-install the container onto the base
and re-plug the appliance into the
electrical outlet.
5 Proceed to use the appliance as
before making sure not to exceed the
recommended maximum capacities..
HOW TO CLEAN
CAUTION: Make sure that the motor
base is unplugged from the power
source before inserting or removing any
attachment and before cleaning.
CAUTION: DO NOT immerse the motor
base into water or any other liquid.
1 Separate/remove all parts from each
other.
2 Clean the motor base with a damp cloth
and wipe dry.
3 Place the pitcher and bowl in the
dishwasher. Place the lids and
attachments on the top rack. Use caution
when handling the blade assemblies as
the blades are very sharp.
NOTE: You may also wash the containers
by filling ¾ of the container with warm
water and a drop of dish washing
detergent, placing the corresponding lid
on the container and pressing the pulse
button a few times. Once clean, remove
the container from the motor base. Rinse
the container, attachment and lid under
running water. Allow all the parts to dry
before storing.
Please call customer service if any
servicing needs to be performed on the
appliance at 1-800-798-7398.
Care & Maintenance
BL700_30_BL701_30_SERIES_IB_ENG_110106.indd 14 11-01-07 10:26 AM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ninja BL700 series and is the answer not in the manual?

Ninja BL700 series Specifications

General IconGeneral
BrandNinja
ModelBL700 series
CategoryBlender
LanguageEnglish

Related product manuals