EasyManua.ls Logo

Ninja DETECT POWER BLENDER PRO - Page 9

Ninja DETECT POWER BLENDER PRO
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
1 Fill Single-Serve Cup
with desired contents.
2 Screw on Hybrid Edge
Blades Assembly
clockwise until you
have a tight seal.
3 Flip cup upside
down and lower
it onto base.
1 When powering on the unit, the BlendSense program will be active by default.
Press the dial to begin the program.
For Manual programs, press MANUAL. Use the dial to select your desired
speed (LOW, MEDIUM, or HIGH), then press the dial to begin.
2 When blending is complete, turn cup anti-clockwise and lift to remove.
3 Turn blade assembly anti-clockwise to remove.
4 Taking it to go?
Place the Spout Lid on top of the cup and turn clockwise to seal.
4 Turn cup clockwise
to lock in place.
ASSEMBLY
BLEND & ENJOY
14
NOTE: Processing Mode programs are only compatible with the and Processor Bowl.
Single-Serve Cup
USING
THE
WARNING: Handle the Hybrid Edge Blades Assembly with care, as the blades are sharp.
During the BlendSense program, if the unit detects more liquid is needed, "ADD LIQUID "
will display in the dial. Press START/STOP, remove the cup from the base, and add 120-240ml
of additional liquid. After reinstalling the cup on the base, press START/STOP again to run the
BlendSense program again.
ADD LIQUID ALERT
PREP TIPS: For best results, cut ingredients in 2 1/2cm
pieces. Place frozen ingredients in the cup last.
Load
IT
UP
Next, add up to 75g of leafy greens
and herbs (optional).
Then, add 2–4 tablespoons of any
dry or sticky ingredients like seeds,
powders, and nut butters (optional).
Top o with ice or frozen ingredients.
Do not blend hot, eervescent, or carbonated liquids or ingredients. Doing so may cause
excessive pressure buildup, resulting in risk of laceration and or the user being burned.
Do not process or grind dry ingredients.
Do not go past the MAX LIQUID line when loading the cup.
Do not overfill the cup with ingredients when using. If
you feel resistance when attaching the Hybrid Edge Blades
Assembly to the cup, remove some ingredients.
Add desired amount of fresh fruits
and vegetables (for best results,
cut in 2 ½cm pieces).
Start by pouring in liquid or Yoghurt.
For thinner results or a juice-like drink,
add more liquid as desired.
Guidelines for best results using the single-serve cup
INGREDIENTS 1 SERVING 2 SERVINGS
Liquid and Yoghurt 180-240ml 240-400ml
Fresh and/or Frozen Fruit 150-225g 300-450g
1
2
3
4
5
ENGLISH

Related product manuals