EasyManuals Logo

Ninja DUALBREW PRO User Manual

Ninja DUALBREW PRO
7 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #2 background imageLoading...
Page #2 background image
3
TRAVEL MUG
& XL SIZES
Place an XL Cup, Travel Mug,
or XL Tumbler on the base of
the brewer.
For how-to videos and more, visit ninjakitchen.com2
FILLING THE WATER RESERVOIR
BEFORE
YOUR
FIRST
BREW
HERE’S WHAT’S IN THE BOX
60 OZ.
THERMAL CARAFE
Keeps coee hot, no
warming plate required.
FROTHER WHISK
60 OZ. REMOVABLE
WATER RESERVOIR
NINJA DUALBREW
BREW BASKET
Comes fully installed in
the brewer. It must always
be inserted when brewing
pods or grounds.
NINJA
POD ADAPTER
Comes fully installed in
the brewer. Always ensure to
insert it over the brew basket
when brewing pods.
CUP, MUG, OR CARAFE
CUP
Pull down the cup platform to
set a mug on it.
CARAFE
Place the carafe on the base
of the brewer.
STEP 1.
Remove the
reservoir
from the base.
Remove the
removable latch
from the back of
the brewer.
STEP 2.
Swing the reservoir base
around the brewer until
it clicks into place. You
may feel some resistance.
Then, rotate the removable
latch 180 degrees and reinsert
it in the new gap where the base
was previously positioned.
The water reservoir can be positioned to the right or along the back of the brewer to optimize counter space.
POSITIONING THE WATER RESERVOIR
To prime your brewer:
1 Plug it into the wall and
turn it on.
2 Fill the water reservoir
to the Full line with fresh
water and place it on the
base.
3 Remove the Ninja Pod
Adapter and slide the
Sliding Lid into the closed
position.
4 Place the empty carafe
under the brew basket
and run a Full Carafe,
Classic Brew.
Once the brew is complete,
discard the water and
you’re ready to brew.
NINJA
SMART SCOOP
Use this to measure
coee grounds.
PAPER FILTER KIT
Fold along the seams
before inserting firmly
into brew basket.
FILL TO THE FULL LINE
Fill up to, but do not exceed,
the Full line.
If you live in a high-altitude
area, running a calibration
brew is required. Not running
a high-altitude calibration
brew in a high-altitude
area will result in excessive
steaming during brewing.
Refer to page 7 of the Owner's
Guide for instructions on
running a high-altitude
calibration brew.
Back of brewer Side of brewer
FULL

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ninja DUALBREW PRO and is the answer not in the manual?

Ninja DUALBREW PRO Specifications

General IconGeneral
TypeCoffee Maker
Water Reservoir Capacity60 oz
Pod CompatibilityK-Cup Pods
Carafe MaterialGlass
DisplayLCD
Model NumberCFP301
Warranty1 year limited
Special FeaturesFold-Away Frother
Brew TypesSpecialty
MaterialPlastic, Stainless Steel
ColorStainless Steel
Brew SizesSingle-Serve (8-12 oz), Carafe (10-50 oz)

Related product manuals