EasyManuals Logo

Ninja MC760 Series User Manual

Ninja MC760 Series
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #12 background imageLoading...
Page #12 background image
11
TOLL FREE: 1-877-646-5288
To order additional parts and accessories, please visit our website ninjaaccessories.com or contact
customerservice: 1-877-646-5288.
Replacement Parts
Troubleshooting Guide
PROBLEM POSSIBLE SOLUTION
“Pot” appears on the
Display Screen
Cooking pot is not inside the main housing. Insert the cooking pot.
“E02” or “E03” appears
on the LCD Display
Ninja Multi-Cooker Plus is not functioning.
Please contact customer service at 1-877-646-5288.
1 Cooking times may vary based on the selected
temperature, the current temperature of the cooking pot,
and the temperature of the ingredients.
2 ALWAYS use nonstick utensils in the cooking pot. Metal
utensils may damage the nonstick coating.
3 For even browning, make sure the food is in an even
layer on the bottom of the cooking pot.
4 Cooking temperature can be adjusted any time during
cooking in Bake mode using the Up and Down arrows.
Cooking time can be adjusted any time during cooking
in Accutemp Slow Cook, Bake, or Steam modes using
the Up and Down arrows. You can toggle between
temperature and time by pressing the TEMP or TIME
buttons.
5 Cooked foods may not brown or crisp on top as much as
in a conventional oven. Instead, foods will brown on the
bottom and crisp on the bottom and sides.
6 If you do not manually set a temperature and time, the
unit will automatically start at the preset temperature and
time.
7 Multiple modes may be required to cook recipes. To
change modes during cooking cycles, simply press a
button to select the new desired mode. Once the new
mode is selected, begin the programming process.
8 If the cooking pot is removed during the cooking cycle
and then placed back into the main housing, the cooking
process will continue as though it was not interrupted.
Cleaning & Maintenance
The Ninja
®
Multi-Cooker Plus should be cleaned thoroughly
after every use.
1 Unplug the unit from the wall outlet and let cool.
2 NEVER immerse the main housing in water or any other
liquid.
3 To clean the main housing and the control panel, wipe
them clean with a damp cloth.
4 Wash the cooking pot, steaming/roasting rack and glass
lid with warm, soapy water. The cooking pot, steaming/
roasting rack, and glass lid can be washed in the
dishwasher.
5 Dry all parts after each use.
6 If food residue is stuck on the cooking pot, fill the pot
with water and allow to soak before cleaning. DO NOT
use scouring pads. If scouring is necessary, use a non-
abrasive cleanser or liquid detergent with a nylon pad or
brush.
7 Please return the unit to SharkNinja Operating LLC for
any other servicing.
NOTE: After usage, the exterior of the cooking pot may
produce a black film when cleaned. This is due to oxidation
and occurs from normal usage.
Hints & Tips

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ninja MC760 Series and is the answer not in the manual?

Ninja MC760 Series Specifications

General IconGeneral
BrandNinja
ModelMC760 Series
CategoryKitchen Appliances
LanguageEnglish

Related product manuals