8
ninjakitchen.com
Care & Maintenance
Replacement Parts
ORDERING REPLACEMENT PARTS
To order additional parts and accessories, please visit: ninjaaccessories.com or
contact Customer Service at: 1-877-646-5288.
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any Stacked Blade Assembly and
before cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1 Separate all parts from each other.
2 Hand Washing: Wash the container, lid, and blade
assembly in warm, soapy water. When washing the
blade assembly, use a dishwashing utensil with a
handle to avoid direct hand contact with blades. Handle
blade assembly with care to avoid contact with sharp
edges. Rinse and air dry thoroughly.
Dishwasher: The container, lid, and blade assembly
are all dishwasher safe.
The lid and blade assembly
are top-shelf dishwasher safe.
Ensure that the blade
assembly is removed from the container before placing
in the dishwasher.
WARNING: Handle the Stacked Blade Assembly
with care when washing, as the blades are
sharp. Contact with the blades’ edges can result
in laceration.
3 Wipe the motor base clean with a damp cloth.
Please call Customer Service if any servicing needs to
be performed on the appliance at 1-877-646-5288.
HOW TO STORE
1 Store the Ninja
®
Professional Blender upright with the
Stacked Blade Assembly inside the pitcher with the lid
secured on top. DO NOT place anything on top. Tuck
power cord in the cord storage compartment in the
back of the unit.
RESETTING THE MOTOR THERMOSTAT
The Ninja Professional Blender features a unique safety
system which prevents damage to the unit’s motor and drive
system should you inadvertently overload your appliance.
If the appliance is being overloaded, the motor will
stop. Allow the appliance to cool for approximately
15 minutes. To reset the appliance, follow the resetting
procedure below:
1
Unplug the appliance from the electrical outlet.
2
Remove and empty the container and ensure that no
food is jamming the Stacked Blade Assembly.
3
Allow the appliance to cool for approximately 15
minutes.
4
Reinstall the container onto the base and plug the
appliance into the electrical outlet.
5
Proceed to use the appliance as before, making sure
not to exceed the recommended maximum capacities.
To Next Page
Loading...
Need help?
General