5 61-877-646-5288 ninjakitche n.com
29
NEVER
operate the appliance without lid
in place.
DO NOT
attempt to defeat the
interlock mechanism. Ensure the container
and lid are properly installed before
operation.
30
DO NOT
expose the container and
accessories to extreme temperature
changes. They may experience damage.
31
NEVER
leave the appliance unattended
while in use.
32
DO NOT
blend hot liquids. Doing so may
result in a pressure buildup and steam
exposure that can pose a risk of the user
being burned.
33
DO NOT
attempt to remove the container
and lid from the motor base while blade
assembly is still spinning. Allow the
appliance to come to a complete stop
before removing lids and containers.
34
Upon completion of processing, ensure
the blade assembly is removed BEFORE
emptying container’s contents. Remove the
blade assembly by carefully grasping the top
of the shaft and lifting it from the container.
Failure to remove the blade assembly before
emptying the container can result in a risk of
laceration.
35 If the appliance overheats, a thermal switch
will activate and temporarily disable the
motor. To reset, unplug the appliance
and allow it to cool for approximately 15
minutes before using again.
36 The maximum wattage rating for this
appliance is based on the configuration of
the Dough Blade Assembly and Precision
Processor
™
Bowl. Other configurations
may draw less power or current.
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY
WARNING
When using electrical appliances, basic safety precautions should always be
followed, including the following:
DID YOU KNOW?
• All containers, lids, and
blade assemblies are BPA
free.
• Our blades, containers,
and lids are top rack
dishwasher safe.
IMPORTANT: Review all
warnings on pages 3–5
before proceeding.
BEFORE FIRST USE
1 Remove all packaging materials from the appliance.
Exercise care when unpacking blade assemblies. All blade
assemblies are sharp.
2 The Chopping Blade Assembly is
NOT
locked in place in
its container. Handle the Chopping Blade Assembly by
grasping the top of the shaft.
3 Wash container, lid, and blade assemblies in warm, soapy
water, using a dishwashing utensil with a handle to avoid
direct contact with the blades. Exercise care when handling
blade assemblies, as the blades are sharp.
4 Thoroughly rinse and air-dry all parts.
5 All attachments are dishwasher safe. It is recommended
that the container, lid, and blade assemblies be placed on
the top rack of the dishwasher. Ensure blade assemblies
are removed from their containers before placing in the
dishwasher. Exercise care when handling blade assemblies.
6 Wipe the motor base with a clean, damp cloth.
To Next Page
Loading...
Need help?
General
