11 121-877-646-5288 ninjakitchen.com
USING YOUR PRECISION PROCESSOR
™
BOWL - CONT�
IMPORTANT: Review all
warnings on pages 3–5
before proceeding.
6 Place lid on Precision
Processor Bowl, with
black line on tab aligned
slightly to the right of tab
on front of bowl. Turn lid
clockwise to lock in place.
When properly locked,
the white line on lid will
line up with the black line
on bowl. When the unit is
connected to power and
the container is correctly
locked into the motor
base, the program buttons
will illuminate and the unit
will be ready for use.
7 Press START/STOP to run
continuously or PULSE to
pulse the blade assembly.
NOTE: Please follow the same
instructions for the Dough
Blade Assembly.
8 To remove the bowl from
the motor base, turn the
bowl counterclockwise
and then lift it.
9 Remove the lid by pressing
the release button on the
front tab, twisting the lid
counterclockwise, and
lifting up. Always remove
the Chopping Blade
Assembly before emptying
any of the ingredients in
the bowl. To remove the
Chopping Blade Assembly,
carefully grasp it by the top
of the shaft and lift it out of
the bowl.
10 Unplug the appliance
when finished. To release
the motor base, gently pull
the unit up and towards
you. Refer to page 13 for
storing instructions.
To Next Page
Loading...
Need help?
General
