Ninja QB3001 Series - Using the Nutri Ninja Slim Cup; Step-by-Step Blending Guide; Finalizing Your Drink

www.sharkninjamanuals.com
8
Using the Nutri Ninja
™
Slim Cup
IMPORTANT: Make sure that the Power Pod is plugged
in for use.
1 Place the Power Pod upside down on a clean, dry, level
surface such as a counter or table top.
2 Add ingredients to the single serve cup.
NOTE: Do not overfill! To avoid spilling, do not add
ingredientspastthe“Max”llline.
3 Place the single serve blade onto the cup and screw it
tightly until a good seal is achieved. (Fig. 1)
4 Turn the Nutri Ninja
™
cup upside down and place it
onto the Power Pod. Press down on the single serve
cup to pulse or blend. (Fig. 2, Fig. 3)
5 Once desired consistency is reached, remove pressure
from single serve cup. Pull straight up to remove. (Fig. 4)
6 Turn the cup upright and remove the single serve blade
by twisting the blade assembly anticlockwise.
7 Place the Sip & Seal
™
drinking lid onto the single serve
drink cup, twist to seal and enjoy!
8 Make sure that the Power Pod is unplugged when not
in use.
NOTE: To order additional Nutri Ninja
™
Cups, please
visit our website: www.sharkninjamanuals.com or
feel free to contact customer service:
1-877-646-5288.
Fig. 1 Fig. 2 Fig. 3 Fig. 4