Ninja QB1004 User Manual (English)

Questions and Answers:

T
Thomas ChavezAug 3, 2025
What to do if my Ninja Blender motor doesn’t start?
- A
  Alison WilsonAug 3, 2025
  If the motor of your Ninja Blender doesn't start or the blade assembly doesn't rotate, first, ensure the Master Pod's bottom is clean and free of any food blocking the connection. Check that the plug is securely inserted into the electrical outlet and verify the fuse or breaker. If necessary, replace the fuse or reset the breaker. Also, make sure the splashguard is securely on the container and the Master Pod is securely placed on the splashguard. If there is still no start, there may be too much food in the container, or the unit may have overheated or overloaded. Unplug the blender and wait about 10 minutes before trying again.
A
Adam LittleAug 9, 2025
Why does food collect on the splashguard of my Ninja QB1004?
- C
  Crystal KingAug 9, 2025
  If food collects on the splashguard or on the sides of the Master Prep Professional Pitcher or Bowl of your Ninja Blender, it might be due to processing too much food at once. Turn off the machine and wait for the blade assembly to stop rotating. Then, remove the Master Pod and the splashguard, and take out some of the food before resuming.
S
Sandra SuarezAug 15, 2025
How to fix unevenly chopped food in Ninja QB1004?
- A
  Allison BellAug 15, 2025
  If your Ninja Blender is chopping food unevenly, try cutting the food into smaller, evenly sized pieces. Also, process smaller amounts per batch.
C
Charles ManningAug 21, 2025
What to do if Ninja Blender chops food too fine?
- B
  barryrodneyAug 21, 2025
  If your Ninja Blender is chopping food too finely or making it too watery, try using brief pulses or process for a shorter amount of time. Also, make sure to let the blade assembly stop completely between pulses.
K
Kimberly LoveAug 27, 2025
Why can’t my Ninja QB1004 Blender make snow from solid ice?
- J
  Jessica FrankAug 27, 2025
  If you cannot achieve snow from solid ice in your Ninja Blender, avoid using ice that has been sitting out or has started to melt. In the beginning, use short pulses to break up large pieces.