www.ninjakitchen.com 10
WARNING: Handle the Upper and Lower Chopping Bowl Blade Assemblies with care, as the blades are
sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to
shatter, which may cause personal injury.
WARNING: DO NOT try to place the Blade Assemblies onto the Master Pod and then into the bowl.
WARNING: DO NOT attempt to operate the appliance without the safety splashguard in place.
WARNING: DO NOT crush ice in Master Prep Bowl or damage may occur to the unit.
WARNING: Never leave the appliance unattended while in use.
CAUTION: DO NOT blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of
the user being burned.
CAUTION: Upper and Lower Chopping Bowl Blade Assemblies are loose and not locked in place. Make sure
to remove the Chopping Blade Assembly before emptying contents of processor bowl.
IMPORTANT: Make sure that the Master Pod is plugged in for use.
WARNING: DO NOT try to place the Upper and
Lower Chopping Blade Assembly onto the Master
Pod and then into the Master Prep Professional
Bowl.
Assembly and Use of the Master Prep
®
Bowl
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the Master Prep Professional Bowl on a clean,
dry, level surface.
3 Holding the Lower Chopping Blade Assembly by the
shaft, place it over the spindle pin inside the Master
Prep Professional Bowl. (fig. 1)
4 Carefully insert the Upper Chopping Blade Assembly
over the Lower Chopping Blade Assembly rotating it
until it locks onto the Lower Chopping Blade Assembly.
(fig. 2)
IMPORTANT: Always assemble the Chopping
Blade Assembly inside the container.
Shaft
Fig. 1 Fig. 2
To Next Page
Loading...
Need help?
General