33
ninjakitchen.eu
ENGLISH
32
DID YOU KNOW?
• You can take your drinks on the go
using the Spout Lids.
• The containers, blade assemblies, and
lids are BPA free and dishwasher safe.
NOTE: All attachments are dishwasher
safe. It is recommended that the lids,
containers and blade assemblies
be placed on the top rack of the
dishwasher. Ensure blade assemblies
and lids are removed from their
containers before placing in the
dishwasher. Exercise care when
handling blade assemblies.
NOTE: Handle the Pro Extractor Blades®
Assembly by grasping around the
perimeter of the blade assembly base.
1 Remove all packaging materials
from the appliance. Exercise care
when unpacking blade assemblies.
All blade assemblies are sharp.
2 Wash containers, lids, and blade
assemblies in warm, soapy, water
using a dishwashing utensil with
a handle to avoid direct contact
with the blades. Exercise care when
handling blade assemblies, as the
blades are sharp.
3 Thoroughly rinse and air-dry all parts.
BEFORE FIRST USE
2 Place the Blade Assembly on the top
of the cup and turn clockwise to seal.
3
Turn cup upside down so the
bottom of the blade assembly is
flat on the worktop.
4 Place the cup upside down on the
motor base. Press down on the cup
to pulse or blend.
1 Add ingredients to the Single-Serve
Cup. DO NOT add ingredients past
the MAX LIQUID line on the cup.
6 Turn cup over so blade assembly
is on top. Twist blade assembly
anti-clockwise to remove. To take
your blended contents on the go,
place the spout lid on cup and turn
clockwise to seal. Do not store with
the blades attached.
5 When blending is complete, lift up
the cup to remove.
BLENDING INSTRUCTIONS
To Next Page
Loading...
Need help?
General
