Ninja QB3001UK series - Using the Nutri Ninja Slim Cup; Assembly and Operation; Post-Blending Steps

www.ninjakitchen.eu 8
Using the Nutri Ninja
®
Slim Cup
IMPORTANT: Make sure that the Power Pod is
plugged in for use.
1 Place the Power Pod upside down on a clean, dry, level
surface such as a counter or table top.
2 Add ingredients to the single serve cup.
NOTE: Do not overfill! To avoid spilling, do not add
ingredientspastthe“Max”llline.
3 Place the single serve blade onto the cup and screw it
tightly until a good seal is achieved. (Fig. 1)
4 Turn the Nutri Ninja cup upside down and place it onto
the Power Pod. Press down on the single serve cup to
pulse or blend. (Fig. 2, Fig. 3)
5 Once desired consistency is reached, remove pressure
from single serve cup. Pull straight up to remove. (Fig. 4)
6 Turn the cup upright and remove the single serve
blade by twisting the Nutri Ninja Blade Assembly
anticlockwise.
7 PlacetheSip&Seal
®
drinking lid onto the single serve
drink cup, twist to seal and enjoy!
8 Make sure that the Power Pod is unplugged when not
in use.
NOTE: To order additional Nutri Ninja Cups, please visit
our website: www.ninjakitchen.eu or feel free to
contact customer service: 0800 862 0453
Fig. 1 Fig. 2 Fig. 3 Fig. 4