4 Press SMART FINISH, then press the
START/PAUSE button to begin cooking
in the zone with the longest time. The
other zone will display Hold. The unit
will beep and activate the second
zone when both zones have the same
time remaining.
5 When cooking is complete, the unit will
beep and “End” will appear on the display.
6 Remove ingredients by dumping them
out or using silicone-tipped tongs/utensils.
DO NOT place drawer on top of unit.
MATCH COOK™
To cook a larger amount of the same food,
or cook dierent foods using the same
function, temperature, and time:
1 Place ingredients in the drawer, then
insert drawer in unit.
2 Zone 1 will remain illuminated. Use the
dial to select the desired cook function.
Use the TEMP arrows to set the
temperature, and use the TIME arrows
to set the time. Make sure to insert the
removable divider before placing your
ingredients.
3 Press the MATCH COOK button to copy
the Zone 1 settings to Zone 2. Then
press the START/PAUSE button to begin
cooking in both zones.
4 “End” will appear on both screens when
cooking ends at the same time.
5 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
COOKING WITH DUALZONE
TM
TECHNOLOGY
DualZone Technology utilises two cooking
zones to increase versatility. The Smart
Finish feature ensures that, regardless of
dierent cook settings, both zones will
finish ready to serve at the same time.
For detailed instructions on using each
function, see pages 8–11.
SMART FINISH™
To finish cooking at the same time when
foods have dierent cook times, temps,
or even functions:
1 Place ingredients in the drawer, then
insert the drawer in unit.
2 Zone 1 will remain illuminated. Use the
dial to select the desired cook function.
Use the TEMP arrows to set the
temperature, and use the TIME arrows
to set the time. Make sure to insert the
removable divider before placing your
ingredients.
3 Select Zone 2, then use the dial to select
the desired cook function. Use the TEMP
arrows to set the temperature, and use
the TIME arrows to set the time.
COOKING WITH TWO ZONES
When Smart Finish or Match Cook are not
selected, technology is integrated into
the design to automatically optimise the
distribution of power when using two zones
with dierent cook times. This means the
food in the zone with the longer cook time
may finish cooking before the set time ends.
Check food frequently to avoid overcooking.
1 Select Zone 1, then use the dial to select
the desired cook function. Use the TEMP
arrows to set the temperature.
2 Use the TIME arrows to set the time.
3 Repeat steps 2 and 3 for Zone 2.
4 Press the START/PAUSE button to begin
cooking in both zones.
5 When cooking is complete in the zone
with the shorter cook time, the power will
then shift to help optimise cook time in
the remaining zone.
6 Continue to monitor food, as it may finish
cooking before the set cook time ends.
7 Remove ingredients by dumping them out
or using silicone-tipped tongs/utensils.
COOKING IN YOUR XXXL FLEXDRAWER AIR FRYER
REFERENCE QUICK START GUIDE FOR RECIPES AND COOKING CHARTS
6 7AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
AU 61 2 8801 7666 | NZ 64 800 112 660
NOTE: If you decide the food in one of
the zones is done cooking before the
cook time is up, you can stop a zone.
Select that zone, then press the START/
PAUSE button to pause the zone or set
the time to zero. See page 12 for further
instructions.
NOTE: It is recommended to shake
your food during cooking. To keep the
time at a synchronised finish, press the
START/PAUSE button to pause both
zones. To pause a single zone during
dual zone cooking, refer to page 12.
NOTE: It is recommended to shake
your food during cooking. To keep the
time at a synchronized finish, Press the
START/PAUSE button to pause both
zones. To pause a single zone during
dual zone cooking, refer to page 12.
NOTE: You can select a dierent
function for Zone 2.
NOTE: There is no preheat needed. Once
you have made your selections, press the
START/PAUSE button to begin cooking.
To Next Page
Loading...
Need help?
General