Ninja XXXL FLEXDRAWER AF500ANZ Series User Manual

COOKING IN YOUR XXXL FLEXDRAWER AIR FRYER – CONT.
14 15AU ninjakitchen.com.au | NZ ninjakitchen.co.nz
AU 61 2 8801 7666 | NZ 64 800 112 660
2 The unit will will default to Zone 1. Select
MEGAZONE to activate the MEGAZONE.
Use the dial to select BAKE.
3 Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time in
1-minute increments up to 1 hour and in
5-minute increments from 1 to 4 hours.
Press the START/PAUSE button to begin
cooking.
5 When cooking is complete, the unit will
beep and “End” will appear on the display.
6 Remove ingredients by dumping them out
or using silicone-tipped tongs/utensils.
NOTE: To convert recipes from a traditional
oven, reduce the temperature by 12°C.
Roast
1 Remove divider from the the drawer,
then install crisper plates. Place
ingredients in the drawer, then
insert drawer in unit.
2 The unit will default to Zone 1. Select
MEGAZONE to activate the MEGAZONE.
Use the dial to select ROAST.
3 Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time in
1-minute increments up to 1 hour and in
5-minute increments from 1 to 4 hours.
Press the START/PAUSE button to
begin cooking.
5 When cooking is complete, the unit will
beep and “End” will appear on the display.
6 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.
Bake
1 Remove divider from the the drawer,
then install crisper plates. Place
ingredients in the drawer, then
insert drawer in unit.
Proof
1 Remove divider from the the drawer,
then install crisper plates. Place
ingredients in the drawer, then
insert drawer in unit.
2 The unit will default to Zone 1. Select
MEGAZONE to activate the MEGAZONE.
Use the dial to select PROOF.
3 Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time in
1-minute increments up to 30 minutes.
Press the START/PAUSE button to
begin proofing.
5 When proofing is complete, the unit will
beep and “End” will appear on the display.
6 Remove ingredients by dumping them out
or using silicone-tipped tongs/utensils.
Reheat
1 Remove divider from the the drawer,
then install crisper plates. Place
ingredients in the drawer, then
insert drawer in unit.
2 The unit will default to Zone 1.
Select MEGAZONE to activate the
MEGAZONE. Use the dial to select
REHEAT.
3 Use the TEMP arrows to set the desired
temperature.
4 Use the TIME arrows to set the time
in 1-minute increments up to 1 hour.
Press the START/PAUSE button to
begin reheating.
5 When reheating is complete, the unit will
beep and “End” will appear on the display.
6 Remove ingredients by dumping
them out or using silicone-tipped
tongs/utensils.

Ninja XXXL FLEXDRAWER AF500ANZ Series Specifications

General

Brand	Ninja
Model	XXXL FLEXDRAWER AF500ANZ Series
Category	Fryer
Language	English