To Next Page
M
Michael GonzalesAug 13, 2025
How to fix Nisca PR5350 initializing 'Ready to Print'?
- GGina JonesAug 13, 2025
If your Nisca Printer displays 'Initializing Ready to Print' message for too long, here are a few things to check: * Wait, as the printer will accept data and begin printing. * Ensure the front access panel is correctly closed, and press the Clear button. * Confirm the top cover to the flip/turn unit is securely closed. * If the print head's temperature is out of range, turn the printer off to cool it, then turn it back on. * Verify cards are loaded correctly with the magnetic stripe in the correct orientation, if applicable.
General
