Battery Options
The P10iX is only compatible with NITECORE 21700 i Series batteries with an output over 15A and CR123/RCR123
batteries.
Note:
1. DO NOT attempt to use the P10iX to charge CR123/RCR123
2. The P10iX is NOT compatible with conventional 21700/18650
3. The TURBO / HIGHER Level is inaccessible when using CR123/RCR123 batteries.
Technical Data
Using a 5,000mAh 21700 Li-ion Battery
FL1 STANDARD TURBO HIGHER HIGH MID LOW ULTRALOW STROBE
4,000
Lumens
1,700
Lumens
850
Lumens
300
Lumens
50
Lumens
2
Lumens
4,000
Lumens
*30min 2h 2h30min 7h15min 38h 350h ─
158m 102m 72m 44m 17m 3m ─
6,250cd 2,610cd 1,280cd 485cd 74cd 3cd ─
2m (Impact Resistance)
IP68, 2m (Waterproof and Submersible)
Note:
The stated data is measured in accordance with the international flashlight testing standard ANSI/PLATO FL 1-2019,
using 1 x 21700 Li-ion battery (5,000mAh) under laboratory conditions. The data may vary in real world use due to
different battery usage or environmental conditions.
* The runtime of TURBO is tested without the temperature regulation.
Using 2 x CR123 Batteries:
To Next Page
Loading...
