24
1. Clean the device in accordance with the instructions and leave it to dry completely.
2. The power cord may be coiled around the upper and lower power cord hooks.
3. Always keep the device in a dry, well-ventilated place out of children’s reach.
4. Transport the device only in its original packaging.
5. Use the device’s handle for holding/carrying it.
6. Protect the device against vibration and shock during transport.
All the packaging materials are 100% recyclable, and are labelled as such. The packaging should be disposed
of in accordance with local regulations.
Keep the packaging materials out of children’s reach, as these materials can pose a hazard.
Proper disposal of the device:
1. Pursuant to WEEE Directive 2012/19/EU, the crossed-out wheelie bin symbol (shown on the side)
is used to label all electric and electronic devices requiring segregation.
2. Do not dispose of the spent product with domestic waste: dispose of it at an electric and electronic
devices collection and recycling point. The crossed-out wheelie bin symbol placed on the product,
instruction manual or package communicates this requirement.
3. The plastics contained in the device can be recycled in accordance with the specic marking. Thanks
to recycling, re-use of materials or other forms of utilizing used equipment you make a signicant
contribution to the protection of our natural environment.
4. Information on electric and electronic devices collection locations is available from local government
agencies or from the dealer.
10 Storage and transport
11 Disposal
12 CE Declaration
This device has been designed, manufactured and marketed in compliance with the requirements of the
Low Voltage Directive, the Electromagnetic Compatibility Directive and the ROHS Directive; therefore, the
product has been marked with the CE mark and a declaration of conformity has been issued for it, which is
made available to market regulators.
To Next Page
Loading...