20
7 Use
Qty Item
1 Workshop vacuum cleaner with power cord
1 Paper dust bag
1
Foam lter
1
Double-function oor brush
1 Crevice nozzle
1 Flexible hose
1 Metal suction tube
4 Wheel
1 User’s manual
1 Textile ltering bag
Open the packaging and carefully take out the device. Check that the set is complete and intact. Check
that the plastic parts and the power cord are not damaged. If you nd that any components are missing or
damaged, contact the dealer and do not use the device. Keep the packaging or dispose of it in accordance
with local regulations.
Caution! For the sake of children’s safety, do not leave any packaging materials accessible and
unattended (plastic bags, cardboard boxes, Styrofoam etc.). Risk of suffocation!
The package should contain the following:
6 Set contents
7.1 Before use
1. Unpack the device.
2. Make sure that the kit includes all the components.
3. Install each of the four wheels (10) by sliding them into the wheel installation openings (17) in the vacuum
cleaner base.
10
17
4. Make sure the foam lter (12) is placed on the cage (20). If not, place it there.
To Next Page
Loading...