niteo WVCS0369-21 - Page 21

21
5. Put the textile ltering bag (21) on the foam lter (12) already installed on the vacuum cleaner cage (20).
6. Put the vacuum cleaner lid (5) onto the body and lock the latches (7) on both sides of the vacuum cleaner.
When the lid (5) is installed, the vacuum cleaner electric outlet (9) should be located above the hose
socket (8).
7. Attach the exible hose using the connection tip for accessories (18) to the metal suction tube (2).
8. Put the desired tip on the metal suction tube (2): the double-function oor brush or the crevice nozzle.
9. Connect the vacuum cleaner connection tip (19) to the hose socket (8), making sure that the tab on the
hose tip points up, so that it ts into the tab on the socket. Then, twist the tip clockwise to lock it.
Caution! You may also connect the exible hose to the air outlet (16) to use the device as a blower. In order
to do this, connect the hose connection tip to the vacuum cleaner, making sure that the tab on the hose tip
points up, so that it ts into the tab on the air outlet (16). Then, twist the tip clockwise to lock it.
10. The double-function oor brush has two options: for large smooth and for carpet surfaces (the button on
the brush housing toggles between the options).
Button set in the position for carpet surfaces:
Button set in the position for large smooth surfaces:
7.2 Turning the device on and off
1. Unwind the power cord. When unwinding, hold the plug to prevent it being damaged accidentally by
hitting the ground.
2. Ensure that the power voltage in the outlet matches the voltage specied on the vacuum cleaner’s rating
plate.
3. Insert the plug into the power outlet.
4. Press the on/off button into the I position to start the vacuum cleaner.
5. When you nish vacuuming, press the on/off button to the 0 position to switch off the device.
6. Take out the plug from the power outlet. Hang the coiled power cord on the dedicated upper hook (15).
Caution! When switching the vacuum cleaner on, hold it to prevent it moving.
7.3 Dry operation – dust bag
When a dust bag is installed, the device can be used to vacuum ne impurities, as with a traditional vacuum
cleaner.
1. Make sure that the device is disconnected from the power outlet.
2. Raise the latch release handles (4), as in the pictures below.