NOCO Genius G3500 Series User Manual

Charging Steps.
A0 0 ~ . A0 ~ ~ ~ r{Q
~v oC3 ~e; . (ltv <Qv ~0 ~0 ~v
~'li ~ _rP ·~ ~Q · ~q; r:-'li
~ A~ /l..r.o- '\.~ s
0
·~ . ~e;
V "C 'f> Q~ ~~·
Step 1 & 2: Analyze & Diagnose
Checks the battery's initial condition, including voltage,
state-of-charge and health, to determine if the battery is
stable before charging.
Step 3: Recovery
Initializes the Recovery desulfation process (if needed)
for deeply discharged or sulfated batteries by pulsing
small amounts of current.
Step 4: Initialize
Starts the charging process with a gentle (soft) charge.
Step 5: Bulk
Begins the Bulk charging process based on the
condition of the battery
and returns 80% of the battery's
capacity.
Step 6: Absorption
Brings the charge level to 90% by delivering small
amounts of current to provide a safe, efficient charge.
This limits battery gassing and is essential to prolonging
battery
life.
Step 7: Optimization
Finalizes the charging process and brings the battery
to
maximum capacity. In this step, the charger utilizes
multi-layered charging profiles to fully recapture capacity
and optimize the specific gravity of the battery for
increased run time and performance. The charger will
switch to Maintenance if the battery tells the charger
that
more current is needed.
10

NOCO Genius G3500 Series Specifications

General

Type	Smart Battery Charger
IP Rating	IP65
Charging Current	3.5A
Battery Capacity	Up to 120Ah
Chemistry	Lead-Acid
Battery Type	AGM
Charging Modes	12V
Safety Features	Overcharge Protection, Short-Circuit Protection, Reverse Polarity Protection
Compatibility	Compatible with all 12V lead-acid batteries including AGM, Gel, and Wet