NOCO Genius Gen Series User Manual

User Guide & Warranty
DANGER
READ AND UNDERSTAND ALL SAFETY INFORMATION BEFORE USING THIS PRODUCT. Failure to
follow these safety instructions may result in ELECTRICAL SHOCK, EXPLOSION, FIRE, which may
result in a SERIOUS INJURY, DEATH, or PROPERTY DAMAGE.
Electrical Shock. Product is an electrical device that can shock and cause serious injury. Do not cut power
cords. Do not submerge in water or get wet.
Explosion. Unmonitored, incompatible, or damaged batteries can explode if used with product. Do not
leave product unattended while in use. Do not attempt to jump start a damaged or frozen battery. Use
product only with batteries of recommended voltage. Operate product in well ventilated areas.
Fire. Product is an electrical device that emits heat and is capable of causing burns. Do not cover product.
Do not smoke or use any source of electrical spark or fire when operating product. Keep product away from
combustible materials.
Eye Injury. Wear eye protection when operating product. Batteries can explode and cause flying debris.
Battery acid can cause eye and skin irritation. In the case of contamination of eyes or skin, flush aected
area with running clean water and contact poison control immediately.
Explosive Gases. Working in the vicinity of a lead-acid is dangerous. Batteries generate explosive gases
during normal battery operation. To reduce risk of battery explosion, follow all safety information instructions
and those published by the battery manufacturer and manufacturer of any equipment intended to be used
in the vicinity of battery. Review cautionary markings on these products and on engine.
For more information
and support visit:
www.no.co/support
GEN Series

NOCO Genius Gen Series Specifications

General

Type	Battery Charger
Series	Gen Series
Display	LED Indicators
Input Frequency	50-60 Hz
Output Voltage	12V / 24V (depending on model)
Number of Banks	1 or 2
Battery Types	Lead-acid (Wet, AGM, Gel, Calcium)
Safety Features	Overcharge protection, short circuit protection, reverse polarity protection
Protection	Overcharge, short circuit, reverse polarity
Weight	Varies by model
Dimensions	Varies by model

Summary

Important Safety Warnings

Personal Safety Precautions

How To Use

Charging Modes Overview

Describes the six charging modes: Standby, 12V, 12V AGM, 12V LITHIUM, 12V REPAIR, and Force Mode.

12V REPAIR Mode

Force Mode Operation

Connecting to the Battery

Polarity and Connection

Guide to identifying battery polarity and making correct connections to avoid damage or injury.

Battery Connection Procedures

Connecting in Vehicle

Detailed steps for connecting the charger to a battery installed within a vehicle.

Connecting Outside Vehicle

Detailed steps for connecting the charger to a battery removed from a vehicle.

Begin Charging Process

Charging Time Estimates

Factors Affecting Charge Time

Table detailing approximate charging times based on battery size and depth of discharge.

Understanding LED Indicators

Charge Status LEDs

Explanation of LEDs indicating charging progress: 25%, 50%, 75%, 100%, and Maintenance.

Understanding Error LEDs

Error Conditions and Solutions

Lists LED indicators for common error conditions and their recommended solutions.

LED Indicators and Mode Buttons

Mode and Charge LEDs

Explains the function of the Mode button and the Charge LED for battery state-of-charge.

Error LED Meanings

Technical Specifications

GEN Series Model Comparison

Specifications for GEN5X1, GEN5X2, GEN5X3 including input/output, battery types, and dimensions.

3 Year Hassle-Free Warranty

Overview of the warranty period, coverage, and the process for repairs or replacements.

Warranty Terms and Conditions

Warranty Claim Process