EasyManua.ls Logo

NOCO Genius GENPRO Series User Manual

NOCO Genius GENPRO Series
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User Guide & Warranty
DANGER
READ AND UNDERSTAND ALL SAFETY INFORMATION BEFORE USING THIS PRODUCT. Failure to
follow these safety instructions may result in ELECTRICAL SHOCK, EXPLOSION, FIRE, which may
result in a SERIOUS INJURY, DEATH, or PROPERTY DAMAGE.
Electrical Shock. Product is an electrical device that can shock and cause serious injury. Do not cut power
cords. Do not submerge in water or get wet.
Explosion. Unmonitored, incompatible, or damaged batteries can explode if used with product. Do not
leave product unattended while in use. Do not attempt to jump start a damaged or frozen battery. Use
product only with batteries of recommended voltage. Operate product in well ventilated areas.
Fire. Product is an electrical device that emits heat and is capable of causing burns. Do not cover product.
Do not smoke or use any source of electrical spark or fire when operating product. Keep product away from
combustible materials.
Eye Injury. Wear eye protection when operating product. Batteries can explode and cause flying debris.
Battery acid can cause eye and skin irritation. In the case of contamination of eyes or skin, flush aected
area with running clean water and contact poison control immediately.
Explosive Gases. Working in the vicinity of a lead-acid is dangerous. Batteries generate explosive gases
during normal battery operation. To reduce risk of battery explosion, follow all safety information instructions
and those published by the battery manufacturer and manufacturer of any equipment intended to be used
in the vicinity of battery. Review cautionary markings on these products and on engine.
For more information
and support visit:
www.no.co/support
GENPRO Series
Question and Answer IconNeed help?

Do you have a question about the NOCO Genius GENPRO Series and is the answer not in the manual?

NOCO Genius GENPRO Series Specifications

General IconGeneral
TypeBattery Charger
Input Voltage100-240V AC
Input Frequency50/60Hz
Output Voltage12V / 24V
DisplayLED Indicators
ModelGENPRO
Battery Types SupportedLead-Acid, Lithium
Protection FeaturesOvercharge, Short Circuit, Reverse Polarity, Overheat
Operating Temperature-20°C to 40°C

Summary

DANGER Warnings

Electrical Shock Hazard

Warns about electrical shock hazard from the product.

Explosion and Fire Risks

Covers explosion and fire hazards associated with battery use.

Eye Injury and Gas Exposure

Details risks of eye injury from debris and exposure to explosive gases.

Important Safety & Usage Guidelines

Product Overview and Initial Setup

Introduces GENPRO Series and basic setup.

Handling, Precautions & Compatibility

Covers safe handling, modifications, accessories, and battery types.

Operating & Storage Conditions

Specifies temperature, location, and storage requirements.

Additional Safety & Regulatory Information

Medical Device & Environmental Precautions

Advises on medical device interference and hazardous atmospheres.

Regulatory Compliance & Product Identification

Details FCC compliance, RF interference, and model number.

How To Use

Charging Modes Explained

Describes the six available charging modes.

Using Lithium and Repair Modes

Details usage for 12V Lithium and 12V Repair modes.

Force Mode & Battery Connection

Explains Force Mode and proper battery connection procedures.

Charging Procedures & Times

Begin Charging & Auto-Memory

Steps to start charging and how auto-memory works.

Estimated Charging Times

Provides estimated charging duration based on battery size.

LED Indicators and Error Codes

Understanding Charge LEDs

Explains the meaning of charge level and status LEDs.

Understanding Error LEDs

Lists error conditions indicated by LEDs and their solutions.

Technical Specifications

GENPRO10 Series Model Comparison

Compares specifications across GENPRO10X1 to GENPRO10X4 models.

General Specifications

Lists key specs like voltage, current, capacity, IP rating, and dimensions.

3 Year Hassle-Free Warranty

Warranty Coverage & Liability Limits

Details product warranty period and NOCO's liability limitations.

Warranty Claim Procedure

Outlines the steps required to submit a warranty claim.

Warranty Exclusions & Conditions

Lists conditions that void the warranty and covered exclusions.

Warranty Registration & Support

Warranty Period Determination

Explains how warranty period is determined with or without proof of purchase.

Product Registration Recommendation

Recommends registering the product online to extend warranty.

Related product manuals