NOCO Genius GENPRO10X1 User Manual

User Guide & Warranty
DANGER
READ AND UNDERSTAND ALL SAFETY INFORMATION BEFORE USING THIS PRODUCT. Failure to
follow these safety instructions may result in ELECTRICAL SHOCK, EXPLOSION, FIRE, which may
result in a SERIOUS INJURY, DEATH, or PROPERTY DAMAGE.
Electrical Shock. Product is an electrical device that can shock and cause serious injury. Do not cut power
cords. Do not submerge in water or get wet.
Explosion. Unmonitored, incompatible, or damaged batteries can explode if used with product. Do not
leave product unattended while in use. Do not attempt to jump start a damaged or frozen battery. Use
product only with batteries of recommended voltage. Operate product in well ventilated areas.
Fire. Product is an electrical device that emits heat and is capable of causing burns. Do not cover product.
Do not smoke or use any source of electrical spark or fire when operating product. Keep product away from
combustible materials.
Eye Injury. Wear eye protection when operating product. Batteries can explode and cause flying debris.
Battery acid can cause eye and skin irritation. In the case of contamination of eyes or skin, flush aected
area with running clean water and contact poison control immediately.
Explosive Gases. Working in the vicinity of a lead-acid is dangerous. Batteries generate explosive gases
during normal battery operation. To reduce risk of battery explosion, follow all safety information instructions
and those published by the battery manufacturer and manufacturer of any equipment intended to be used
in the vicinity of battery. Review cautionary markings on these products and on engine.
For more information
and support visit:
www.no.co/support
GENPRO Series

NOCO Genius GENPRO10X1 Specifications

General

Brand	NOCO Genius
Model	GENPRO10X1
Category	Battery Charger
Language	English

Summary

DANGER Safety Warnings

Electrical Shock Safety

Product is electrical and can shock. Do not cut cords or submerge in water.

Explosion Safety

Unmonitored batteries can explode. Do not leave unattended. Use correct voltage.

Fire Safety

Product emits heat. Do not cover. Avoid sparks and combustible materials.

Eye Injury Prevention

Wear eye protection. Batteries can explode. Acid causes irritation. Flush and seek medical help.

Explosive Gases Hazard

Lead-acid batteries generate explosive gases. Follow all safety instructions.

Important Safety Warnings

Getting Started Guide

Before use, read battery precautions, check voltage, and chemistry.

Personal Safety Precautions

Use as intended, have water, wear protection, wash hands.

Product Handling and Storage

Product Modifications

Operating Location

Prevent acid contact, avoid restricted ventilation. Do not place battery on charger.

Operating Temperature Range

Designed for -4°F to 122°F. Do not charge frozen batteries.

Product Compatibility and Care

Battery Compatibility

Cleaning and Maintenance

Explosive Atmospheres

How To Use

Charging Modes Overview

Explanation of the six available charging modes: Standby, 12V, 12V AGM, 12V Lithium, 12V Repair, Force Mode.

Using 12V Lithium Mode

Using 12V Repair Mode

Using Force Mode

Connecting to the Battery

Connecting Battery Installed in Vehicle

Steps for connecting the charger to a battery installed in a vehicle, with spark prevention.

Connecting Battery Outside Vehicle

Steps for connecting the charger to a battery outside a vehicle, with spark prevention.

Begin Charging Process

Charging Steps Summary

Understanding Error LEDs

Interface Overview

Mode Button

Overvoltage Error LED

Bad Battery Error LED

Reverse Polarity Error LED

"Press and Hold" Mode LED