NOCTUA NA-IS1-12 Sx2
INSTALLATION MANUAL
Scan this code to display
multilingual manuals on
your phone.
Designed to replace the fan’s stock NA-AVP1
anti-vibration pads, the NA-IS1-12 are compatible with
all current square-frame Noctua 120x25mm fans and
extremely straightforward to install:
For case fan applications, either the supplied self-tapping
screws or the included NA-AV3 anti-vibration
mounts can be used to sandwich the spacer between
the fan and the case panel. For radiator mounting, both
M3 and UNC 6-32 screws are supplied.
Case fan installation with NA-AV3
1
Included mounting parts:
2x NA-IS1-12 inlet spacers
8x NA-AV3
anti-vibrations mounts
8x NM-SFS4-BK
long fan screws
8x NM-SFS5-BK
radiator screws (M3)
8x NM-SFS6-BK
radiator screws (UNC)
2 Case fan installation with screws
3 Radiator installation
To Next Page
Need help?
General
