Noctua NA-IS1-14 Sx2 User Manual

NOCTUA NA-IS1-14 Sx2
INSTALLATION MANUAL
Scan this code to display multilingual manuals on your phone.
Designed to replace the fan’s stock NA-AVP1 anti-vibration
pads, the NA-IS1-14 are compatible with all current
square-frame Noctua 140x25mm fans and extremely
straightforward to install:
For case fan applications, either the supplied
self-tapping screws or the included NA-AV3 anti-vibration
mounts can be used to sandwich the spacer between the fan
and the case panel. For radiator mounting, both M3 and
UNC 6-32 screws are supplied.
Case fan installation with NA-AV3
1
Included mounting parts:
2 Case fan installation with screws
3 Radiator installation
2x NA-IS1-12 inlet spacers
8x NA-AV3
anti-vibrations mounts
8x NM-SFS4-BK
long fan screws
8x NM-SFS5-BK
radiator screws (M3)
8x NM-SFS6-BK
radiator screws (UNC)

Noctua NA-IS1-14 Sx2 Specifications

General

Brand	Noctua
Model	NA-IS1-14 Sx2
Category	Computer Hardware
Language	English

Summary

Case Fan Installation

Installation with NA-AV3

Install the NA-IS1-14 spacers using NA-AV3 anti-vibration mounts for case fan applications.

Installation with Screws

Install the NA-IS1-14 spacers using supplied self-tapping screws for case fan applications.

Radiator Installation

Screw Type Selection

Use correct M3 or UNC 6-32 screws for radiator mounting based on manufacturer specifications.

Support and Warranty Information

Product Support

Contact Noctua support for assistance with the NA-IS1-14 Sx2 and consult the website for FAQs.