Nokeval 2011KCI - Introduction; Manufacturer Information

INTRODUCTION
2011KCI and 2211KCI are input cards specially
designed for Konecranes. They can be placed in
any of Nokeval E and F series large displays, like
1000F4.
The card provides one (2011KCI) or two (2211KCI)
2-8 V analog input channels. The upper end of
these can be scaled freely, and independently on
each channel.
These models have been superceded by 2012KCI
in spring 2007.
A separate Technical manual is available on
request, covering more details of the KCI displays.
Table of contents
Introduction......................................................................................................................................................2
Ordering...........................................................................................................................................................3
Installing...........................................................................................................................................................4
Operation.........................................................................................................................................................7
User interface...................................................................................................................................................9
Specifications.................................................................................................................................................11
Manufacturer
Nokeval Oy
Yrittäjäkatu 12
FIN-37100 Nokia
Finland
Tel +358 3 3424800
Fax +358 3 3422066
email support@nokeval.com
WWW http://www.nokeval.com
2