Math/Op
Mathematical operation. The result is placed
on channel 7.
The operation can be one of the following:
• Off: No mathematical operation. Channel 7
is not included in the display scanning in
mode Scan.
• Sum: Sum of the channels From1+From2.
• Avg: Average (From1+From2)/2.
• Diff: Difference From1-From2.
• Mul: Multiplication From1*From2.
• Div: Division From1/From2. Dividing by
zero will give an undefined result.
• Min: Lesser of the two From1 or From2.
• Max: greater of the two.
• Sqrt: Square root from the channel
selected with From1. A negative value will
give negative results.
Tip: a square of the value can be calculated
by selecting Mul operation and setting
From1=From2.
Math/Dec
The number of decimals to be displayed on
the math channel.
Master monitor menu
Mainch
The channel being displayed.
Act
The state of the external contact and the
front panel button *.
To Next Page
Loading...