Settings
41
Charger > Lights — Set the lights permanently on. Select Automatic to set the
lights on for 15 seconds after a keypress.
Headphones — Select the activated profile when a headset in connected.
■ Configuration
You can configure your device with settings required for certain services to
function correctly. Your service provider may also send you these settings.
Select Menu > Settings > Configuration and from the following:
Default configuration settings — View the service providers saved in the device. To
set the configuration settings of the service provider as default settings, select
Options > Set as default.
Activate default in all applications — Activate the default configuration settings for
supported applications
.
Preferred access point — View the saved access points. Scroll to an access point,
and select Options > Details to view the name of the service provider, data bearer,
and packet data access point or GSM dial-up number.
Connect to service provider support — Download the configuration settings from
your service provider
.
Device manager settings — Select when to allow service software updates.
Personal configuration settings — Add new personal accounts for va
rious services
manually, and to activate or delete them. To add a new personal account if you
have not added any, select Add new; otherwise, select Options > Add new. Select
the service type, and select and enter each of the required parameters. The
parameters differ according to the selected service type. To delete or activate a
personal account, scroll to it, and select Options > Delete or Activate.
To Next Page
Loading...
