Nokia 32 - Connecting the Nokia 32 terminal to a PBX trunk line

To change a CLI mode, key in 4**CLI_Mode#.
A more detailed configuration of the CLI functionality can be made using the Nokia 32
Configurator software (see 2.6 Calling Line Identification)
3.4 SELECTING NETWORK
To select a certain network operator, a five-digit operator code must be keyed in.
To select a network, key in 5**Operator_Code#.
For automatic network selection, key in 5**000#.
The selected network can also be changed with the Nokia 32 Configurator software (menu:
GSM Settings -> Network Selection).
Figure 7: Selecting network
3.5 CHANGING APPLICATION MODULE EXTENSION MODES
Outgoing call
To change extension mode to the outgoing call mode A, key in 6**#.
To change extension mode to the outgoing call mode B, key in 7**#.
Incoming call
To change extension mode to the incoming call mode A, key in 8**#.
To change extension mode to the incoming call mode B, key in
9**Pre -Defined_Extension_Number#.