167
Copyright
© 2003 Nokia. All rights reserved.
4 Select Edit active service settings.
Select each of the settings one by one and key in all the required settings.
• Settings’ name - Key in the new name for the connection set and
press OK.
• Homepage - Key in the homepage address of the WAP service that
you want to use, and press OK.
• Session mode - Select Permanent or Temporary.
• Connection security - Select On or Off.
• When the connection security is On, the phone tries to use a secure
connection with the WAP service. If a secure connection is not
available, the connection will not be made. If you wish to connect
anyway, with a non-secure connection, you must set the connection
security to Off.
• Data bearer - Select GSM data or GPRS.
• Bearer settings - Settings for the selected bearer. See below for more
information.
For pricing, connection speed and other information, contact your
network operator or service provider.
To Next Page
Loading...
