168
Copyright
© 2003 Nokia. All rights reserved.
Settings when GSM data is the selected data bearer
• Dial-up number - Key in the phone number and press OK.
• IP address - Key in the address, and press OK. You obtain the IP address
from your network operator or service provider.
• Authentication type - Select Secure or Normal.
• Data call type - Select Analog or ISDN.
• Data call speed - Select the speed you want to use, or select Automatic.
Automatic is available only if the current selected data call type is
Analog. The actual data call speed depends on the service provider.
• Login type - Select Manual or Automatic.
• User name - Key in the user name and press OK.
• Password - Key in the password and press OK.
• Display terminal window - Select Yes, if you want the server to perform
user authentication when you access intranet sites during a dial-up
connection.
Settings when GPRS is the selected data bearer
• GPRS access point - Key in the access point name and press OK.
• An access point name is needed to establish a connection to a GPRS
network. You obtain the access point name from your network operator or
service provider.
• IP address - Key in the address and press OK. You obtain the IP address
To Next Page
Loading...
