Nokia 3310 - For Your Safety; Road Safety and Interference; Usage in Specific Locations

Received calls : This network
service shows the last 10 phone
numbers from which you have
accepted a call .
Dialled numbers : Shows the last
20 phone numbers that you have
called
or attempted to call
.
Erase recent call lists : Allows you
to delete all the phone numbers
and names from Menus 4-1 to 4-
3 .
Show call duration : Shows the
approximate duration of your
outgoing and incoming calls . You
can reset these call timers by
selecting Clear timers (Menu 4-5-
5) .
Note : The actual time
invoiced for calls by your
service provider may vary,
depending upon network
features, rounding-off for
billing, and so forth .
Show call costs : This network
service shows the approximate
cost of your last call or all calls in
terms of units specified within the
Show costs in function (Menu 4-
7-2) .
Note : The actual invoice
for calls and services from
your service
provider
may
vary, depending upon
network features,
rounding-off for billing,
taxes and so forth .
18
Call cost settings : The Call cost
limitfunction allows you to limit
the call costs to the desired
amount of charging units or units
of currency (network service) . The
Show costs infunction specifies in
which units the phone shows the
remaining talk-time (contact your
service provider for charging unit
prices) .
Note that when no more charging
or currency units are left, only
calls to the emergency number
112 maybe possible .
Prepaid credit : When using a
prepaid SIM card, you can make
calls only when there are enough
credit units on the SIM card
(network service) . Options : Credit
info display (show or hide
remaining units in
standby mode),
,Credit available (amount of
remaining units), Last event costs,
Recharge status .
" Tones
(Menu 5)
In
this menu you can change
the
settings of the currently selected
profile and create ringing tones of
your
own
.
See "Profiles (Menu
12)"
on
page 25 .
Ringing
tone :
Sets the tone that
you
hear when you receive
a
call .
Ringing
volume : Sets the volume
level
for the ringing and message
alert
tones .
Incoming call alert :
Defines how
the phone
notifies you
of
incoming
voice
calls
.
For
example,
when
Off
is selected, the phone stays silent
when you receive a call and
~p
is
shown in standby mode .
Composer :
Allow you to
create your
own
ringing
tones . Select
the tone that you want to edit and
key in the notes . For example,
press

for
note f .
shortens I(-) and
lengthens (+) the duration of the
note
or rest
. '~
inserts a rest .
sets the octave . O makes
the note sharp (not available for
notes e and b) . O and © move
the cursor right or left . d deletes
a note or rest to the left .
When the tone is complete, press
~ (Options) and select one of
the
following : Play, Save (saves
the
tone in the ringing tone list),
Tempo, Clear
screen, Exit .
19
Menu functions
Note
: Your phone must
be
switched
on to use
this
function . Do
notswitch on
the phone when wireless
phone use is prohibited or
when it may cause
interference or danger .
Message alert tone :
Sets the
tone
that you hear when you receive a
text message .
Keypad
tones : Sets
the volume
for
keypad tones
.
Warning tones : Sets the phone to
sound tones
e .g . when
the battery
is running out of power .
Vibrating alert : Sets the phone to
vibrate when you receive a call or
a text message .
Screen saver : Sets the picture that
is displayed in standby mode after
a specified time ('timeout') . You
can select from the same pictures
as in the Picture messages menu .