445N
33
7.8. Installing serial number to processor
Signal cable
of monitor
Parallel cable
Power cable
You will find serial number on rating label behind of back cover. Use NDP repair software version
8.201 or newer to create the serial number.
7.9. Magnet rings
Do not move purity magnet rings. If the purity magnet rings a re found to have moved during trans-
portation or handling, set them just in the original position by tracing the locking paint put on purity
magnet rings and holder of beam bender and then readjust the static convergence.
7.10. Beamlanding
Test pattern:
Adjust first the color of Top and Bottom edges equal to that of the center. Adjust the color purity of
the corners.
Monitor software 0.31 (and futrher versions) adjusts the color purity automatically.
To Next Page
Loading...
