Nokia 5230 - Page 20

Nokia 5230
RM-588 / RM-593 / RM-594 / RM-629
Service Manual Level 1&2
20 Confidential • Copyright © 2010 NOKIA • All rights reserved Version 8.0
7) Connect the TOUCH PANEL ASSY connector to the
PWB. While connecting the connector be careful not
to damage any of the nearby components.
8) Position the LCD as shown and use the tweezers
to place the LCD flex to the connector. Be careful not
to damage the flex.
9) Close the locking mechanism with the SS-93. 10) Place the LCD FRAME ASSY as shown and connect
the UI FLEX ASSY connector to the PWB. Be careful
not to damage the connector.
11) Connect the UPPER FLEX ASSY connector also. Be
careful not to damage any nearby components.
12) Turn over the LCD FRAME ASSY and place it on
top of the engine board. Be careful not to damage
the flexes!