Nokia 5230
RM-588 / RM-593 / RM-594 / RM-629
Service Manual Level 1&2
21 Confidential • Copyright © 2010 NOKIA • All rights reserved Version 8.0
13) Tighten the 2 screws to the torque of 16 Ncm in
the order shown.
14)
Assemble the KEYMAT by first attaching the two
clips on the top side. Then attach the clip on the
bottom end.
15) Remove the protective film from the DISPLAY
ADHESIVE.
16) Lower down the LCD on top of the LCD FRAME
ASSY. (1) Carefully press the LCD from the sides so
that DISPLAY ADHESIVE activates. (2) Do not touch
the LCD driver area.
17) Remove the protective film from the LCD. 18) Remove the protective film from the TOUCH
PANEL ASSY and..