nokia 
 CONNECTING PEOPLE 
PAGE 13 (22)  Approved 1.0
CMO Operations & Logistics  
 
MGR
WW Service Solutions & Development   
Bochum / Germany  CONFIDENTIAL  17.3.2005
 
 
9.) Carefully open the LCD connector. Do not to damage 
the LCD connector. 
 
 
10.) Remove UI Shield Assy with the LCD Module. 
 
 
11.) Lever out the LCD Module from the UI Shield. 
 
12.) Protect the LCD Module with a protective film. 
 
 
13.) Separate the Light Guide Assy from the Engine 
Module. Do not use the SRT-6 on the right side to avoid 
damaging underneath components. 
 
 
14.) Now, take away the Light Guide Assy. 
 
 
15.) Remove the DC-Jack with a DC-Plug. 
 
 
16.) Remove the Microphone with tweezers. 
 
Service Manual 6021 Level 1&2  Copyright © 2005 NOKIA Corporation. All rights reserved.