4
”Voice messages” on page
38.
The phone’s keypad is
locked. See ”Keypad lock
(Keyguard)” on page 9.
The phone does not ring for
an incoming call or text
message when Incoming
call alert is set to Off and
Message alert tone is set to
Off. See ”Tone settings” on
page 54.
The alarm clock is set to
On. See “Alarm clock”, 58.
The countdown timer is
running. See ”Countdown
timer” on page 67.
The stopwatch is running in
the background. See
”Stopwatch” on page 67.
A GPRS dial-up connection
is established, refer to
”GPRS modem settings” on
page 73.
The GPRS connection is
suspended (on hold), for
example if there is an
incoming or outgoing call
during a GPRS dial-up
connection.
Infrared connection
indicator, see ”Infrared” on
page 72.
All your calls are diverted
to another number, Divert
all voice calls. If you have
two phone lines, the divert
indicator for the first line is
and for the second line
. See ”Call divert” on
page 49.
or If you have two phone
lines, the indicator displays
the selected phone line. See
”Line for outgoing calls” on
page 51.
The loudspeaker has been
activated, see
”Loudspeaker” on page 13.
Calls are limited to a closed
user group. See ”Security
settings” on page 55.
The timed profile is
selected. See ”Profiles
(Menu 4)” on page 48.
, or
A headset, handsfree, or
loopset, is connected to the
phone.
To enable the phone to show the
time and date in standby mode, see
”Clock” and ”Date” on page 49.
RH-4_FCC_2003-4-16.fm Page 4 Friday, April 18, 2003 4:34 PM
To Next Page
Loading...
