12
Call waiting is under Settings, Call
settings. See also ”Call waiting” on
page 50.
To answer the waiting call
•Press .
• Press Answer if it’s available.
• Press Options, and select
Answer.
When the waiting call is active, the
original call is on hold.
To reject the waiting call
• Press Options, and select Reject.
• Press Reject if available.
During a call, press to answer
the waiting call. Then the first call
is put on hold.
Tip: Press to end the
active call.
■ Swap calls (network
service)
When you have an active call and a
held call, you may be able to switch
their call status by pressing
Options, and select Swap. Then the
held call is active, and the
previously active call is put on hold.
■ Transfer calls
When you have an active call and a
held call, you may be able to
connect the other two parties by
pressing Options, and select
Transfer. Then your call with either
party is ended.
■ Make a conference call
Conference calling is a network
service. It allows up to six people to
take part in a call.
1. Call the first participant.
2. To call a new participant, press
Options and select New call.
3. Enter, or find from the phone
book, the phone number of the
new participant, and press Call.
The first call is put on hold.
4. When the new call is answered,
join the first participant to the
call by pressing Options, and
select Conference.
Alternatively, you can also ask
the second particiapant to call
you after you have established a
call with the first participant.
5. To add a new participant to the
conference call, repeat steps 2 to
4.
6. To have a private conversation
with one of the participants:
Press Options and select Private
and select the desired
participant. Rejoin the
conference call as described in
step 4.
7. To end the conference call, press
.
RH-4_FCC_2003-4-16.fm Page 12 Friday, April 18, 2003 4:34 PM
To Next Page
Loading...
