Nokia 6108 - Standby Mode; Screen Saver; Essential Indicators in Standby Mode

3
English
2. Pop-Port
TM
connector for the
headset and the data cable.
3. Infrared (IR) port
■ Standby mode
When the phone is ready for use,
and you have not keyed in any
characters, the phone is in standby
mode.
1. The current operator’s logo
(network service).
2. Signal strength: the higher the
bar, the stronger the signal.
3. Battery charge level: the higher
the bar, the more power in the
battery.
4. Selection key functions.
You can customise the function
of the right selection key in the
standby mode in Settings, Right
selection key settings. See also
”Right selection key” on page
48.
Screen saver
The phone automatically activates a
digital clock screen saver in
standby mode for power saving.
Note that if you have not set the
time, 00:00 is displayed. You can
set the time in Settings, Time and
date settings.
You can customise the time after
which the phone activates the
screen saver in Settings, Display
settings, Screen saver timeout.
The screen saver can not be
activated when the flip cover of the
phone is open.
Wallpaper
You can set your phone to display a
background image, wallpaper,
when the phone is in standby mode.
You can choose a wallpaper in
Settings, Display settings,
Wallpaper. See also ”Wallpaper” on
page 53.
Essential indicators in
standby mode
You have received one or
several text or picture
messages. See ”Read and
reply to a message” on page
27.
You have received one or
several multimedia
messages. See ”Reading
and replying to a
multimedia message” on
page 32.
You have received one or
several voice messages. See
RH-4_FCC_2003-4-16.fm Page 3 Friday, April 18, 2003 4:34 PM